We answer at 3am
Open 24 hours, seven days a week, public holidays included
We come to you
The van carries the workshop, so nothing gets towed anywhere
4.9 Star Reviews
Verified Google reviews from around PE
You hear the price first
We quote before we drive out, and that number does not change
Electric Fence Installation
What a properly installed fence does for you
Most break-ins start at the boundary. Somebody looks at the wall, decides it is easy, and comes over the top. An electric fence changes that decision before anyone touches it. The strands are visible from the street, the warning signs are on every stretch, and the energiser sounds the alarm the moment a wire is cut, shorted or pulled.
We install fences that do that job and keep doing it. That means the right energiser for the length of fence, brackets that suit your wall, stainless or aluminium wire that copes with sea air, and an earth that actually works in the sandy ground we have around the Bay.
When it is worth putting one in
You have just moved in and the boundary walls have nothing on top
There has been a break-in on your street or in your complex
Your old fence is so tired that replacing it costs about the same as fixing it
You run a yard, workshop or warehouse with stock behind a palisade
Your insurer has asked for perimeter security before renewing
You want the fence linked to your alarm or armed response
Wall-top or free-standing
Most homes in Port Elizabeth get a wall-top fence. Brackets are fixed to the top of the boundary wall and carry anywhere from four to twelve strands, angled inward or straight up depending on the wall and how much reach you want. It is neat, it does not take up any garden, and it suits the face-brick and plastered walls you see from Walmer to Lorraine.
Free-standing fences go up on their own posts. They are the usual choice for industrial sites, smallholdings and long boundaries where there is no wall to build on, and they are common out towards Bluewater Bay Industrial and Markman. We also fit fences along the top of palisade and clear-view fencing, which gives you the electric barrier without blocking the view.
Choosing the energiser
The energiser is the box that powers the fence and raises the alarm. Getting it right matters more than the number of strands. Too small and a long fence runs weak at the far end. Too basic and you lose zones, remote arming and the alarm outputs that let it talk to your security company.
We size the energiser to your fence length and how you want to use it. For most homes that means a single or two-zone unit with a battery backup, so the fence keeps running and keeps alarming through load shedding and power cuts. For larger properties we split the fence into zones so you know which side was touched.
Built for the coast
Port Elizabeth is hard on fencing. Salt air eats cheap wire and fittings, the wind throws branches and leaves onto the strands, and sandy soil makes a good earth harder to achieve than it looks. A fence that ignores any of that will start false alarming within a year.
So we use corrosion-resistant wire and fittings, we put in enough earth spikes for the ground on your property, and we cut back or work around vegetation that will blow into the fence. Homes near the beachfront in Summerstrand and Humewood get extra attention here, because that is where the salt does the most damage.
Linking it to your alarm and armed response
A fence that alarms with nobody listening only scares the person touching it. We connect the energiser to your existing alarm panel or straight to your armed response provider, so a cut wire at 2am is a signal on somebody's screen, not just a siren.
If you want to arm and disarm from your phone or a keyring remote, we can set that up too. It makes a real difference for people who come and go late at night and do not want to walk to a keypad in the garage.
Legal from day one
Every fence installed in South Africa since 1 October 2012 needs an electric fence system certificate of compliance, and it has to be issued by a registered installer. We are registered, so the certificate comes with the job. Signs, wire heights, gate sections and earthing are all built to SANS 10222-3 from the start, and you do not need to bring anybody else in afterwards. There is more on what the certificate covers under electric fence compliance certificates.
Already have a fence?
If the fence is mostly sound but alarming for no reason, running weak or partly dead, it usually needs a repair, not a new install. Our electric fence repair service covers that, and we will tell you honestly which one makes sense once we have tested it.
How electric fence installation works
WhatsApp us your address, a few photos of the walls and a rough length of the boundary.
We come out, measure up and talk through wall-top or free-standing, strands and zones.
You get a written quote before any work starts, and that price does not change.
We fit the brackets or posts, run the wire and install the warning signs.
We mount the energiser, battery backup and earth spikes, and connect your alarm if you want it.
We test every zone, show you how to arm, disarm and read the alarm, and hand over the remotes.
We issue your electric fence certificate of compliance once the fence passes inspection.
We're out this way most weeks — so you'll find us near:
What affects the price of an electric fence?
Every property is different, so we quote after we have seen it. The things that move the price are:
The total length of the boundary being fenced
How many strands you want, and wall-top versus free-standing
The energiser, the number of zones and whether you want remote arming
Battery backup and any link to your alarm or armed response
Gates, corners and changes in wall height that need extra work
Whether an old fence needs stripping off first
The quote is free and comes before we start. If anything changes once work begins, we talk to you before it costs you more.
GetKeys Auto Locksmith
51 Seaview Rd, Farms Port Elizabeth,
Gqeberha, 6390
084 513 4914
Open 24 hours, 7 days a week
FAQS
Do you install electric fences on top of existing walls?
Yes. Wall-top fences are what most homes in Port Elizabeth get. We fix brackets to the top of your boundary wall and run the strands from there, so you do not lose any garden.
How many strands do I need?
Most homes are well served by six to eight strands on a wall. Higher walls, businesses and properties that have had problems before often go higher. We recommend a number once we have seen the boundary.
Will the fence work during load shedding?
Yes, if it has a battery backup, which we fit as standard on residential installs. The energiser keeps the fence live and the alarm working while the power is off.
Can you connect the fence to my alarm or armed response?
Yes. We link the energiser to your alarm panel or directly to your armed response provider, so a cut or shorted wire sends a signal and not just a siren.
Do I get a certificate of compliance with a new fence?
Yes. We are registered electric fence installers, so we issue the certificate once the fence passes inspection. You do not need anyone else to sign it off.
How long does an installation take?
A typical home is done in one or two days. Long boundaries, free-standing fences and business premises take longer, and we give you a timeline with the quote.

